This is an old revision of the document!

Troubleshooting RADIUSdesk Accel-ppp Agent

• This page will explain some of the working of the RADIUSdesk Accel-ppp Agent as well as some troubleshooting tips.

Startup

• The rd.local startup script does three things
  • Configure IP Table rules for NAT.
  • Run the /etc/MESHdesk/u.lua script to fetch the Accel-ppp config from RADIUSdesk.
  • Start the /etc/MESHdesk/heartbat.lua script to start reporting back to RADIUSdesk.

u.lua

• You can run u.lua manually to see if it fetches its settings

cd /etc/MESHdesk
sudo ./u.la
E4-5F-01-41-59-70
  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  2382    0  2382    0     0  14699      0 --:--:-- --:--:-- --:--:-- 14795
Restarting accel-ppp (via systemctl): accel-ppp.service.

• You can confirm that the config was proper formulated and everything is in order with /etc/accel-ppp.conf

sudo cat /etc/accel-ppp.conf

• You can also do the Ajax call which u.lua does from a browser to evaluate the JSON data that RADIUSdesk returns.
• https://cloud.radiusdesk.com/cake4/rd_cake/accel-servers/get-config-for-server.json?mac=64-64-4A-D1-2D-67
• Use the above URL as reference and replace the FQDN with your server's FQDN or IP Address and also the MAC Addres with your device's MAC Address.
• The second part that might need troubleshooting is the reporting side.

report_to_server.lua

• You can run the reporting script manually:

cd /etc/MESHdesk/reporting
sudo ./report_to_server.lua 

• You should should see something like the following in the output:

  % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                 Dload  Upload   Total   Spent    Left  Speed
100  1939    0    39  100  1900    226  11024 --:--:-- --:--:-- --:--:-- 11273
{
    "success": true,
    "data": []
}
Doing the *light* report