RADIUSdesk

logo
Trace:

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
technical:openwrt-wan-network [2022/09/18 20:24]
admin 		technical:openwrt-wan-network [2022/09/25 20:19] (current)
admin [Xiaomi 4A 100M]
Line 19: Line 19:
  
 <WRAP center round tip 100%> <WRAP center round tip 100%>
-  * When looking at these sample files keep in mind that our aim is to use the device section called **br-lan** as a bridge.+  * When looking at these sample files keep in mind that our aim is to use the //device section// called **br-lan** as a bridge.
   * Traditionally the LAN ports will be part of it.   * Traditionally the LAN ports will be part of it.
   * We however configure it now in such a way that the WAN port becomes part of it instead of the LAN ports.   * We however configure it now in such a way that the WAN port becomes part of it instead of the LAN ports.
Line 235: Line 235:
   * This brings us to the end of the detailed discussion of the **/etc/MESHdesk/configs/wan_network** file.   * This brings us to the end of the detailed discussion of the **/etc/MESHdesk/configs/wan_network** file.
   * Be sure that this file is tweaked so it will work on your hardware.   * Be sure that this file is tweaked so it will work on your hardware.
 +
 +====== Some Hardware Info ======
 +===== Xiaomi 4C =====
 +  * wan_network
 +<file bash wan_network>
 +config interface 'loopback'
 +    option device 'lo'
 +    option proto 'static'
 +    option ipaddr '127.0.0.1'
 +    option netmask '255.0.0.0'
 +
 +config device
 +    option name 'br-lan'
 +    option type 'bridge'
 +    list ports 'eth0.1'
 +
 +config interface 'lan'
 +    option device 'br-lan'
 +    option proto 'dhcp'
 +
 +config interface 'client_0'
 +    option proto 'dhcp'
 +
 +config interface 'client_1'
 +    option proto 'dhcp'
 +
 +config switch
 +    option name 'switch0'
 +    option reset '1'
 +    option enable_vlan '1'
 +
 +config switch_vlan
 +    option device 'switch0'
 +    option vlan '2'
 +    option ports '4 2 6t'
 +
 +config switch_vlan
 +    option device 'switch0'
 +    option vlan '1'
 +    option ports '1 6t'
 +
 +</file>
 +  * hardware section
 +<file bash meshdesk>
 +config hardware 'xiaomi_4c'
 + option morse_led '/sys/class/leds/blue:power/brightness'
 + option internet_led '/sys/class/leds/yellow:power/brightness'
 + option wifi_led 'led0'
 +</file>
 +
 +===== Xiaomi 4A 100M =====
 +  * wan_network
 +<file bash wan_network>
 +config interface 'loopback'
 + option device 'lo'
 + option proto 'static'
 + option ipaddr '127.0.0.1'
 + option netmask '255.0.0.0'
 +    
 +config device
 + option name 'br-lan'
 + option type 'bridge'
 + list ports 'eth0.1'
 +
 +config interface 'lan'
 + option device 'br-lan'
 + option proto 'dhcp'
 +
 +config interface 'client_0'
 +    option proto 'dhcp'
 +
 +config interface 'client_1'
 +    option proto 'dhcp'
 +
 +config switch
 +    option name 'switch0'
 +    option reset '1'
 +    option enable_vlan '1'
 +
 +config switch_vlan
 +    option device 'switch0'
 +    option vlan '1'
 +    option ports '0 6t'
 +
 +config switch_vlan
 +    option device 'switch0'
 +    option vlan '2'
 +    option ports '4 2 6t'
 +</file>
 +  * hardware section
 +<file bash meshdesk>
 +config hardware 'xiaomi_4a_100'
 + option morse_led '/sys/class/leds/blue:power/brightness'
 + option internet_led '/sys/class/leds/yellow:power/brightness'
 + option wifi_led 'led0'
 +</file>
 +
 +===== Totolink X500R (WiFi6) =====
 +  * wan_network
 +<file bash wan_network>
 +config interface 'loopback'
 + option device 'lo'
 + option proto 'static'
 + option ipaddr '127.0.0.1'
 + option netmask '255.0.0.0'
 +
 +config device
 + option name 'br-lan'
 + option type 'bridge'
 + list ports 'wan'
 +
 +config interface 'lan'
 + option device 'br-lan'
 + option proto 'dhcp'
 +
 +config interface 'client_0'
 +    option proto 'dhcp'
 +
 +config interface 'client_1'
 +    option proto 'dhcp'
 +</file>
 +  * hardware section
 +<file bash meshdesk>
 +config hardware 't_x5000r'
 + option morse_led '/sys/class/leds/blue:sys/brightness'
 + option internet_led '/dev/null'
 + option wifi_led 'dev:null'
 +</file>
 +
 +
 +
 +
  
  
Last modified: 2022/09/18 20:24