RADIUSdesk

logo
Trace:

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
technical:openwrt-meshdesk [2022/09/19 04:56]
admin [Select Packages To Include With Firmware] 		technical:openwrt-meshdesk [2023/12/27 19:20] (current)
admin
Line 1: Line 1:
-====== OpenWRT 22.03.x with MESHdesk packages ======+====== OpenWRT 23.05.x with MESHdesk packages ======
 <WRAP center round info 90%> <WRAP center round info 90%>
-Follow these instructions to include the MESHdesk package on devices capable of running OpenWRT version 22.03.x+Follow these instructions to include the MESHdesk package on devices capable of running OpenWRT version 23.05.x
 </WRAP> </WRAP>
 ===== Minimum Hardware Requirements ===== ===== Minimum Hardware Requirements =====
Line 58: Line 58:
   * Check out the **openwrt-meshdesk** package from the Github repository.   * Check out the **openwrt-meshdesk** package from the Github repository.
 <code> <code>
-#Do this in the working directory e.g. cd 23.03.0 (on the same level as the openwrt directory)+#Do this in the working directory e.g. cd 23.05.2 (on the same level as the openwrt directory)
 git clone https://github.com/RADIUSdesk/openwrt-meshdesk.git openwrt-meshdesk git clone https://github.com/RADIUSdesk/openwrt-meshdesk.git openwrt-meshdesk
 </code> </code>
Line 115: Line 115:
 | Base system    |**MESHdesk**    |     | | Base system    |**MESHdesk**    |     |
 | Kernel Modules -> Network Support  | kmod-batman-adv | Keep the default options | | Kernel Modules -> Network Support  | kmod-batman-adv | Keep the default options |
 +| Kernel Modules -> Netfilter Extensions  | kmod-nft-bridge | <wrap em>Include if you want to block or speed limit users</wrap> |
 | Languages -> Lua  |lua-mosquitto  |      | | Languages -> Lua  |lua-mosquitto  |      |
 | Languages -> Lua  |**libiwinfo-lua**   |     | | Languages -> Lua  |**libiwinfo-lua**   |     |
Line 131: Line 132:
 | Network -> Firewall   | **iptables-nft**   | **Very important for backward compatibly of iptables**   | | Network -> Firewall   | **iptables-nft**   | **Very important for backward compatibly of iptables**   |
 | Network -> Routing and Redirection  | **relayd** |      | | Network -> Routing and Redirection  | **relayd** |      |
-| Network -> WirelessAPD | **wpad IEEE 802.1x Auth/Supplicant (built-in full)**   | Un-select wpad-basic|+| Network -> WirelessAPD | **wpad IEEE 802.1x Auth/Supplicant (built-in full)**   | Un-select wpad-basic also required for Hotspot 2.0 |
 | Network   | batctl-full  | Un-select batctl-default | | Network   | batctl-full  | Un-select batctl-default |
 |Network  | mosquitto-client-ssl  | Note the **CLIENT** package | |Network  | mosquitto-client-ssl  | Note the **CLIENT** package |
 +|Network  | iw-full  | Required for Hotspot 2.0 |
  
   * After you selected these packages you can save the configuration and issue **make** to build the firmware.   * After you selected these packages you can save the configuration and issue **make** to build the firmware.
 +  * The completed firmware will be located under the **openwrt/bin/target/<architecture>** folder.
 +  * In our case we will use //openwrt/bin/targets/ramips/mt76x8/openwrt-ramips-mt76x8-xiaomi_mi-router-4a-100m-squashfs-sysupgrade.bin//
   * The firmware you just built will be standard OpenWrt in effect and you can flash your hardware as with normal OpenWRT then access it on **192.168.1.1**.   * The firmware you just built will be standard OpenWrt in effect and you can flash your hardware as with normal OpenWRT then access it on **192.168.1.1**.
         * Username and Password is **root** and **admin** for Luci and ssh.         * Username and Password is **root** and **admin** for Luci and ssh.
   * The next section will cover the files you have to attend to for the specific hardware tweaks.   * The next section will cover the files you have to attend to for the specific hardware tweaks.
 +
 +==== Note on Warnings  ====
 +
 +  * When you issue the **make** command these warnings might pop-up.
 +  * They are harmless and can be ignored.
 +<code bash>
 +WARNING: Makefile 'package/utils/busybox/Makefile' has a dependency on 'libpam', which does not exist
 +WARNING: Makefile 'package/utils/busybox/Makefile' has a dependency on 'libpam', which does not exist
 +WARNING: Makefile 'package/utils/busybox/Makefile' has a build dependency on 'libpam', which does not exist
 +WARNING: Makefile 'package/network/services/lldpd/Makefile' has a dependency on 'libnetsnmp', which does not exist
 +WARNING: Makefile 'package/utils/policycoreutils/Makefile' has a dependency on 'libpam', which does not exist
 +WARNING: Makefile 'package/utils/policycoreutils/Makefile' has a dependency on 'libpam', which does not exist
 +WARNING: Makefile 'package/utils/policycoreutils/Makefile' has a build dependency on 'libpam', which does not exist
 +make[2]: Entering directory '/home/system/Documents/fw_sdk/23.05.2/openwrt/scripts/config'
 +make[2]: 'conf' is up to date.
 +make[2]: Leaving directory '/home/system/Documents/fw_sdk/23.05.2/openwrt/scripts/config'
 +make[1] world
 +make[2] target/compile
 +make[3] -C target/linux compile
 +</code>
 +
 +
  
 ===== Files to tweak ===== ===== Files to tweak =====
Line 148: Line 174:
  
   * Once the tweaks are completed we can test everything out.   * Once the tweaks are completed we can test everything out.
-  * The following link shows how to point the device to the controller using the GUI+  * Log onto your device using Luci (http://192.168.1.1) 
 +  * The following image shows how to point the device to the controller using the GUI. 
 +{{:technical:meshdesk_activate.png|}}
   * Point the device to your controller and reboot it.   * Point the device to your controller and reboot it.
   * If all goes well it will show up in Unknown Nodes.   * If all goes well it will show up in Unknown Nodes.
Last modified: 2022/09/19 04:56