Differences

This shows you the differences between two versions of the page.

--- technical:openwrt-meshdesk-file [2022/09/18 21:11]
admin [Adjust the settings section accordingly]
+++ technical:openwrt-meshdesk-file [2022/09/18 21:17] (current)
admin [Review new hardware]
@@ Line 70: / Line 70: @@
 </code>
-  * The following table lists some of the important items with comments
+==== Review new hardware ====
+  * The following table lists the important items with comments
 ^ Item        ^ Typical value           ^ Comment    ^
@@ Line 77: / Line 80: @@
 | settings -> skip_radio_0  | 0 | set to 1 when radio0 is a 5G radio and you don't want to use it for config SSID  |
-=== Tweaks For Our Environment ===
+===== Remember Your Environment =====
+  * Finally you need to adjust some items to match up with your controller and its environment.
   *  The following table lists some of the important items with comments
 ^ Item        ^ Typical value           ^ Comment    ^
 | internet1 -> disabled    | 1  | change it to 0 in order for the device to be centrally controlled   |
-| internet1 -> dns    | cloud.radiusdesk.com  | Supply Dummy Value If Not Using DNS System |
+| internet1 -> dns    | cloud.radiusdesk.com  | <wrap em>Supply Dummy Value If Not Using DNS System e.g. nohost.radiusdesk.com</wrap> |
 | internet1 -> protocol | https | Can be http or https |
 | internet1 -> ip | 176.31.15.210 | Fallback when FQDN does not resolve on FQDN not used |

RADIUSdesk