RADIUSdesk

Trace:

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
user_guide:openvpn_bridges_prep_coova [2016/09/27 06:08] – [Create the main config file] adminuser_guide:openvpn_bridges_prep_coova [2016/10/06 06:18] (current) – [Making things permanent] admin
Line 69: Line 69:
 HS_PROVIDER_LINK=http://coova.github.io/ HS_PROVIDER_LINK=http://coova.github.io/
 HS_LOC_NAME="My HotSpot"           # WISPr Location Name and used in portal HS_LOC_NAME="My HotSpot"           # WISPr Location Name and used in portal
-#Very important for the Firmware to test connectivity to OpenVPN server 
-#and report back to RD on it. 
-HS_ANYIP=on  
 </file> </file>
   * Create the VLAN config directories   * Create the VLAN config directories
Line 92: Line 89:
 HS_DYNIP=10.101.1.1 HS_DYNIP=10.101.1.1
 HS_DYNIP_MASK=255.255.0.0 HS_DYNIP_MASK=255.255.0.0
-HS_STATIP=10.101.0.2 +HS_STATIP=10.101.0.1 
-HS_STATIP_MASK=255.255.0.0+HS_STATIP_MASK=255.255.255.0
 # HS_DNS_DOMAIN= # HS_DNS_DOMAIN=
  
Line 112: Line 109:
 HS_DYNIP=10.102.1.1 HS_DYNIP=10.102.1.1
 HS_DYNIP_MASK=255.255.0.0 HS_DYNIP_MASK=255.255.0.0
-HS_STATIP=10.102.0.2 +HS_STATIP=10.102.0.1 
-HS_STATIP_MASK=255.255.0.0+HS_STATIP_MASK=255.255.255.0
 # HS_DNS_DOMAIN= # HS_DNS_DOMAIN=
  
Line 133: Line 130:
 HS_DYNIP=10.103.1.1 HS_DYNIP=10.103.1.1
 HS_DYNIP_MASK=255.255.0.0 HS_DYNIP_MASK=255.255.0.0
-HS_STATIP=10.103.0.2 +HS_STATIP=10.103.0.1 
-HS_STATIP_MASK=255.255.0.0+HS_STATIP_MASK=255.255.255.0
 # HS_DNS_DOMAIN= # HS_DNS_DOMAIN=
  
Line 178: Line 175:
 ===== Making things permanent ===== ===== Making things permanent =====
   * Ensure that CoovaChilli will start up after reboots.   * Ensure that CoovaChilli will start up after reboots.
 +  * If your server only has one interface card, add this line to the **/etc/rc.local** file:
 +<code bash>
 +#Add the startup of OpenVPN
 +/usr/sbin/service openvpn start
 +
 +#Start up Chill
 +/etc/init.d/chilli start
 +
 +exit 0
 +
 +</code>
 +  * If your server has two interface cards, issue the following command:
 <code bash> <code bash>
 sudo update-rc.d chilli start 99 2 3 4 5 . stop 20 0 1 6 . sudo update-rc.d chilli start 99 2 3 4 5 . stop 20 0 1 6 .
Last modified: 2016/09/27 06:08