This is an old revision of the document!
MESHdesk supported hardware
- The following hardware is currently tested and working:
| Manufacturer | Model | Comment | Image |
|---|---|---|---|
| ZBT | New hardware with non-Atheros chip |  |
|
| Dragino | MS14-P | This is the same hardware used by Village Telco (MP2) | |
| Mikrotik | RB433 | Dual radio support for high speed mesh networks |  |
| OpenMesh.com | OM2P |  |
|
| PC Engines | Alix 3D2 | Dual radio support for high speed mesh networks |  |
| TP Link | N600 (WDR3500/3600) | Dual radio support for high speed mesh networks |  |
| TP Link | WR841N/ND |  |
|
| Ubiquity | Picostation M2/M5 | This is the newer high speed model that supports 802.11n |  |
| Ubiquity | NanoStation M2/M5 | This is the newer high speed model that supports 802.11n |  |
| Ubiquity | UniFi AP/AP-LR |  |
|
| Ubiquity | UniFi AP PRO | Dual radio support for high speed mesh networks | |
| Ubiquity | BulletM2 |  |
|
| Ubiquity | AirGateway |  |
|
| Ubiquity | AirRouter / AirRouter HP |  |
|
| Village Telco | MP2 Phone | We modify their firmware to include FXS support |  |
My hardware is not in the list - what now?
- Don't be discouraged if your hardware is not on the list of tested hardware.
- If your hardware can run the latest version of OpenWrt (Barrier Breaker) and have at least 4M flash we are pretty confident that it will also be able to run the MESHdesk firmware.
- If your hardware can run OpenWrt Barrier Breaker and support Virtual Access Points (VAPs) it should also be able to work with MESHdesk.
- The MESHdesk firmware consists of a standard OpenWRT and some extra packages which can be installed using the opkg package manages that comes included with OpenWrt.
- You can also build your own MESHdesk firmware images. See the section on firmware to get more detail on compiling and flashing the MESHdesk firmware yourself.
- We are eager to work with technical minded people on this matter and as a result increase the list of known tested and working hardware.