RADIUSdesk

Trace: › md_new_simple_mesh

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
user_guide:md_new_simple_mesh [2016/06/26 22:01] – [Encryption- to give the mesh a password] adminuser_guide:md_new_simple_mesh [2016/06/26 23:16] (current) – [Add the Nodes to your Mesh] admin
Line 25: Line 25:
  
   * Click on the Entry Points Tab in the Edit Mesh Window.   * Click on the Entry Points Tab in the Edit Mesh Window.
 +
   * Click Add on the Actions Toolbar in the Entry Points Tab. A New Entry Point window opens.   * Click Add on the Actions Toolbar in the Entry Points Tab. A New Entry Point window opens.
-  * Fill in a Name for the SSID, example Bean There Wifi + 
-  * If you want the WiFi to be hidden to the public then select the Hidden tickbox+  * Fill in a Name for the SSID, example Bean There Wifi. 
 + 
 +  * If you want the WiFi to be hidden to the public then select the Hidden tickbox. 
   * Select Client isolation tick box so that users cannot connect to each others' devices.   * Select Client isolation tick box so that users cannot connect to each others' devices.
-  * Or deselect the Client Isolation tick box in an office where users must be able to print to a wireless printer+ 
 +  *** Or** deselect the Client Isolation tick box in an office where users must be able to print to a wireless printer. 
   * Select Apply to all nodes to make sure the SSID is available over the whole mesh.   * Select Apply to all nodes to make sure the SSID is available over the whole mesh.
 +
   * Click OK.   * Click OK.
  
 ===== Encryption- to give the mesh a password ===== ===== Encryption- to give the mesh a password =====
  
-  * Click on the Encryption sub-tab. +{{:user_guide:md:encryption_tab.png?500|}} 
-  * Select None if you want users to login without giving a password + 
-  * Select WPA2 Personal and supply an 8 letter password if you want to secure the Wifi.+  * Click on the Encryption sub-tab in the EditMesh Entry Port Window. 
 + 
 +  * Select **None** if you want users to login without giving a password. 
 + 
 +  * Select **WPA2 Personal** and supply an **8 letter password** if you want to secure the Wifi. 
  
 ===== We suggest you leave the Mesh Settings and Batman Adv Settings on default ===== ===== We suggest you leave the Mesh Settings and Batman Adv Settings on default =====
Line 45: Line 57:
  
   * Click on the Exit Points tab   * Click on the Exit Points tab
 +
 +{{:user_guide:md:new_mesh_exit_point.png?400|}}
 +
 +
   * Select the type of Exit Point you have onto the internet.   * Select the type of Exit Point you have onto the internet.
     * Select the Ethernet Bridge button if you have an Ethernet cable supplying internet.     * Select the Ethernet Bridge button if you have an Ethernet cable supplying internet.
     * Select the Tagged Ethernet Bridge if your Ethernet connection gives a VLAN number.     * Select the Tagged Ethernet Bridge if your Ethernet connection gives a VLAN number.
     * Select NAT + DHCP if you connect to a DHCP server.     * Select NAT + DHCP if you connect to a DHCP server.
 +
   * We will cover the Captive Portal in the  [[user_guide:md_new_captive_portal_mesh|next]] How To.   * We will cover the Captive Portal in the  [[user_guide:md_new_captive_portal_mesh|next]] How To.
-  * We will keep our selection on Ethernet Bridge for this How To. + 
-  * Click OK+  * We will keep our selection on **Ethernet bridge** for this How To. 
 + 
 +  * Click NEXT 
  
  
Line 58: Line 78:
 ===== Node Settings- VERY IMPORTANT ===== ===== Node Settings- VERY IMPORTANT =====
  
-  * Click on the Node Settings Tab in the Edit Mesh Window +  * Click on the Node Settings Tab in the Edit Mesh Window. 
-  * The Node settings Tab has two sub-tabs: System and Wifi.+ 
 +  * Under the Node settings Tab we will cover two sub-tabs: System and Wifi. 
 +{{:user_guide:md:edit_mesh_node_settings.png?400|}} 
   * In the System sub-tab:   * In the System sub-tab:
-    * Fill in the Root User/ Top Level Access Provider Password into the Password field. This gives you access to the router/node. + 
-    * Select the country where the router/node is installed. +     * Fill in the Root User/ Top Level Access Provider Password into the Password field. This gives you access to the router/node. 
-    * Select the Time Zone of that location. This is EXTREMELY  IMPORTANT as this timing is used for all the accounting of data. +  
-  * Click on the WiFi sub-tab+     * Select the country where the router/node is installed. 
 + 
 +     * Select the Time Zone of that location. This is EXTREMELY  IMPORTANT as this timing is used for all the accounting of data. 
 + 
 + * Click on the WiFi sub-tab 
 + 
 +{{:user_guide:md:edit_mesh_node_settings2.png?400|}} 
     * In the 2.4 Channel field we suggest you leave the counter on 1. If your country does not allow 1 then try 6 or 11.     * In the 2.4 Channel field we suggest you leave the counter on 1. If your country does not allow 1 then try 6 or 11.
 +
     * In the  5 Channel field we suggest you leave the power on 44(low power).     * In the  5 Channel field we suggest you leave the power on 44(low power).
 +
     * Click SAVE     * Click SAVE
 +
  
 ===== Add the Nodes to your Mesh ===== ===== Add the Nodes to your Mesh =====
-Click on the MESHdesk icon on the RADIUSdesk home page. The MESHdesk window opens.+ 
 +You can add a node to your mesh by clicking on the **Nodes tab** in the Edit Mesh window and filling in a known MAC address** or** take the automated route by following these instructions: 
 + 
 +[[userguide:md_add_nodes| Add the nodes to the Mesh on Meshdesk]]
  
  
  
Last modified: 2016/06/26 22:01