RADIUSdesk

Trace: › md_node_config_utility

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
user_guide:md_new_captive_portal_mesh [2016/06/27 23:44] – adminuser_guide:md_new_captive_portal_mesh [2016/06/28 21:48] (current) – [Add a Captive Portal to your Mesh] admin
Line 10: Line 10:
 {{ :user_guide:md:edit_mesh_entry_port.png?800 |}} {{ :user_guide:md:edit_mesh_entry_port.png?800 |}}
  
-  * First add a New Entry Point for the Captive Portal Exit Point to connect to+First add a New Entry Point for the Captive Portal Exit Point to connect to.
  
   * Click on the Entry Points Tab in the Edit Mesh Window.   * Click on the Entry Points Tab in the Edit Mesh Window.
Line 17: Line 17:
  
   * Fill in a Name for the SSID, example NewCaptivePortal.   * Fill in a Name for the SSID, example NewCaptivePortal.
 +
 +  * Click OK
 +
 +  * You will see on the list of Entry points that the new SSID is not connected to an Exit point.
 +
 +Now Create the Captive Portal
 +
 +  * Click on the Exit points Tab in the Edit Mesh window.
 +
 +  * Click the Add button in the action Toolbar. A New Exit point window opens.
 +
 +  * Select Captive Portal
 +
 +{{:user_guide:md:new_captive_portal_exit.png?500|}}
 +
 +  * Click NEXT to open this window.
 +
 +{{:user_guide:md:captive_portal_exit_common_settings.png?500|}}
 +
 +The Captive Portal creation has been greatly automated.
 +
 +  * Select Auto-Detect
 +
 +  * Select the SSID you just created under the **Connects with** field.
 +
 +  * Select Add Dynamic RADIUS client.
 +
 +  * Select your realm e.g. Bean There under the **Realm** field.
 +
 +  * Select Add Login Page.
 +
 +  * Select the Login Page you want to use for this captive portal. 
 +
 +  * Click NEXT to finish.
 +
 +You should now see the selected login page when you go onto the SSID created above.
 +
  
  
  
  
Last modified: 2016/06/27 23:44