RADIUSdesk

Trace:

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
user_guide:click_to_connect_howto [2016/06/12 21:41] – adminuser_guide:click_to_connect_howto [2016/06/12 22:45] (current) – [Add the Click-to-Connect Button to the Log-in page] admin
Line 1: Line 1:
-====== Steps for a Clik-To-Connect Login Page ======+====== Steps for a Click-To-Connect Login Page ====== 
 ===== Create the Click-to-Connect Profile ===== ===== Create the Click-to-Connect Profile =====
  
 Weather you want to limit your click-to-connect users for one hour or one day or 1 GB of data, something **you have to add to the Profile Component** you choose is an attribute set that will **reset the limitation with every device**. Otherwise the first customer to connect will use up the allowed data and no one else will be allowed access. Weather you want to limit your click-to-connect users for one hour or one day or 1 GB of data, something **you have to add to the Profile Component** you choose is an attribute set that will **reset the limitation with every device**. Otherwise the first customer to connect will use up the allowed data and no one else will be allowed access.
  
-RADIUSdesk installs with two ready-to-use Click to connect Profiles.  Select the CTC-1Hour Profile for one hour free access and CTC-100M for 100Mb free access.+RADIUSdesk installs with two ready-to-use Click to connect Profiles.  Select the **CTC-1Hour Profile** for one hour free access and **CTC-100M** for 100MB free access.
  
 ====If you build your own Profiles:==== ====If you build your own Profiles:====
Line 21: Line 22:
 For a Profile Component that limits Data,  the following attributes <wrap em>in red</wrap> are important to include: For a Profile Component that limits Data,  the following attributes <wrap em>in red</wrap> are important to include:
  
-== 500Mb Data free per device per day ==+== 100MB Data free per device per day ==
 ^ Attribute       ^ Check or Reply   ^Operator ^Value     ^ Comment    ^ ^ Attribute       ^ Check or Reply   ^Operator ^Value     ^ Comment    ^
-|Rd-Total-Data    |Check  |:=   | 50000000       |Multiply by 1024 if you want to be more technical :-P  | +|Rd-Total-Data    |Check  |:=   | 10000000       |Multiply by 1024 if you want to be more technical :-P  | 
 |<wrap em>Rd-Reset-Type-Data</wrap> |Check  |:=   | <wrap em>daily</wrap>       | For each device to have this limit daily  | |<wrap em>Rd-Reset-Type-Data</wrap> |Check  |:=   | <wrap em>daily</wrap>       | For each device to have this limit daily  |
 |Rd-Cap-Type-Data |Check  |:=   | hard       | Options are hard or soft. Soft will not cut the user off if they are over the limit  | |Rd-Cap-Type-Data |Check  |:=   | hard       | Options are hard or soft. Soft will not cut the user off if they are over the limit  |
Line 29: Line 30:
 |Fall-Through |Reply  |:=   | Yes       | Required to group these components together  | |Fall-Through |Reply  |:=   | Yes       | Required to group these components together  |
  
 +---------
  
 ===== Create the Click-to-Connect User ===== ===== Create the Click-to-Connect User =====
  
-  * Click on Permanent Users on the RADIUSdesk home screen +  *Create a New Permanent User called **click_to_connect@radiusdesk**. (Radiusdesk is the NAS ID of our default captive portal. Be sure to fill in <wrap em>YOUR NAS ID</wrap> after the **@** sign.) 
-{{:user_guide:permanent_users_icon.png?200|}} +
-  * Create a permanent user called **click_to_connect@radiusdesk**. (Radiusdesk is our NAS ID the default captive portal. Be sure to fill in YOUR NAS ID after the **@** sign.)+
   * Give it the password of **click_to_connect**   * Give it the password of **click_to_connect**
-  * Select the Realm and the Profile you want to use. We suggest an uncapped type profile.+ 
 +  * Select the **Realm** and the** Profile** you want to use as discussed above. 
   * Also ensure that the **Cap type for Data** says on **Hard**.   * Also ensure that the **Cap type for Data** says on **Hard**.
-{{:user_guide:click_to_connect_03.png|}} 
-{{:user_guide:click_to_connect_02.png|}} 
-{{:user_guide:click_to_connect_01.png|}} 
-{{:user_guide:click_to_connect_04.png|}} 
  
 +  * Click **OK** 
 +
 +{{:user_guide:click_to_connect-perm.png?400|}}
 +<WRAP center round tip 60%>
 ==== Whats in a name? ==== ==== Whats in a name? ====
-  * You may wonder why we call the **Click-to-Connect** user **click_to_connect@fbt-01**.+  * You may wonder why we call the **Click-to-Connect** user **click_to_connect@radiusdesk**.
   * The name can be broken up in two parts.   * The name can be broken up in two parts.
   * The first part is everything before the **@**.   * The first part is everything before the **@**.
   * The last part is everything after the **@**.   * The last part is everything after the **@**.
   * The user's password has to be the same as the first part e.g. click_to_connect.   * The user's password has to be the same as the first part e.g. click_to_connect.
-  * The second part will be automatically added by the login pages when the user clicks the **Click-to-connect** button and is determined by a the configuration of the Dynamic login pages.+  * The second part will be automatically added by the login pages when the user clicks the **Click-to-connect** button and is determined by a the configuration of the Dynamic login pages 
 +</WRAP>
  
-Time to tackle the last bit which is the **NAS device** and **Dynamic login pages** and see how it all comes together.+--------- 
 +===== Enable the Click-to-Connect Button to the Log-in page =====
  
 +  * Click on **Menu -> Dynamic login pages** , The Dynamic login pages Window opens.
  
----------+{{:user_guide:menu-dynamic-login.png?200|}}
  
-===== Add the NAS device ===== +  * **Select** the Login Page you want to add a Click-to-connect button to.
-  * Click on **Menu -> NAS devices -> NAS devices** to open the NAS devices management applet. +
-  * Since the Coova Chilli captive portal used by **Funky Bean There** comes from an unknown IP Address we will add a NAS device with connection type **Dynamic client**. +
-  * We will use the value of **nasid** specified in the Coova Chilli set-up to uniquely identify the incoming connection. +
-  * We assume that it was specified as **fbt-01** (Short for Funky Been There - 01). The value of **nasid** will then be used by Coova-Chilli in the RADIUS requests which it sends out to the RADIUS server in the form of the **NAS-Identifier** attribute. +
-  * After you selected **Dynamic client** you can specify **Unique AVP combination** as **NAS-Identifier** and the value **fbt-01** in the **Dynamic AVP detail** sub-tab. +
-  * On the **NAS** sub-tab you can specify the **Name** also as **fbt-01** (It is a good convention to keep them the same) along with a shared secret. This shared secret is the same as the one defined in the Coova Chilli configuration. +
-  * The realms should only show the **Funky Been There** realm. +
-<WRAP center round tip 60%> +
-When you do this action as the root user; the list of realms will change depending weather you decide to make a NAS device **available to sub-providers** or not. +
-</WRAP> +
-  * After you added the device; be sure to edit it again and ensure that the **NAS -> Optional info** sub-tab also have the NAS-Identifier specified as **fbt-01**. +
-  * Save you work and wait at least 10 minutes to allow the cron job to restart the FreeRADIUS server in order for this device to be added. +
-<WRAP center round tip 60%> +
-This cron entry runs a script to check if FreeRADIUS needs a restart +
-<code bash> +
-#Every 10 minutes to keep it stable +
-*/10 * * * * www-data /var/www/cake2/rd_cake/Console/cake -app /var/www/cake2/rd_cake Freeradius >> /dev/null 2>&1 +
-</code> +
-</WRAP> +
-  +
-Now that we have the NAS device added to RADIUSdesk; we can do the **Dynamic Login page**+
  
--------+  * Click **Edit** on the Action Toolbar in the Dynamic login pages Window.
  
-===== Add a Dynamic login page ===== +  * Click on the **Click-to-Connect Tab** in the Edit Window.
-  * Click on **Menu -> Dynamic login pages** to open the Dynamic login pages management applet.+
  
-<WRAP center round alert 60%> +{{:user_guide:enable_click-to-connect.png|}} 
-**Hey!!** There is already some login pages listed here+ 
 +  * Tick the **Enable** check box to insert the Click-to-connect button on the Login page. 
 + 
 +  * If you want **no other** fields on the login page, also tick the **Only Click-to-connect** check box.  
 + 
 +  * Your login page should now look like this: 
 + 
 +{{:user_guide:free_access.png?400|}}
  
-  * If there happen to be login pages listed already which you did not intend to have listed, it is because that realm has the **Make available to sub-providers** option checked. 
-  * To fix this you have to log out as the current Access Provider and log in as root.  
-  * Now you can remove the unwanted login pages by un-checking that option. 
-  * Log in again as the Access Provider for **Funky Bean There**. 
-</WRAP> 
-  * Click on the plus sign in the toolbar and add the new Dynamic login page. 
-  * Add your own new Dynamic login page and make it **NOT** available to sub-providers. 
-  * After you added the Dynamic Login page you can further edit it by uploading photos for the slideshow. 
Last modified: 2016/06/12 21:41