This is an old revision of the document!

More On Managed Hardware

MESHdesk and APdesk can manage OpenWRT based hardware.
The device requires a minimum of
- 64M RAM
- 8M FLASH
Devices with up to three radios are supported.
We use the basic OpenWRT (21.02.1 at the time of this writing) with two added packages.
- zzz-MESHdesk - This package contains the libraries which act as the agent between the controller and the device.
- luci-app-meshdesk - This Luci application allows you to enable and disable central management using the Luci Web Interface.
There are currently three Xiaomi APs for which we supply ready built firmware
- 4A 100M Edition
- 4A Gigabit Edition
- 4C
These three devices are fully supported in MESHdesk which means you can deploy Batman-Adv based mesh networks in a snap.
- The following Internet connection to a device is supported
  1. WAN (Ethernet) with DHCP
  2. WAN (Ethernet) with Fixed IP Address
  3. WAN (Ethernet) with PPPoE (ISP)
  4. Mesh (Batman-Adv)
  5. Wi-Fi with DHCP
  6. WiFi Client with DHCP
  7. WiFi Client with Fixed IP Address
  8. WiFi Client with PPPoe (WISP)
  9. LTE/4G (requires OpenWRT supported 4G Modem)

RADIUSdesk