RADIUSdesk

Trace: › pi-configure

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
md:pi-configure [2021/11/04 22:01] – [Adapt the settings in MESHdesk] adminmd:pi-configure [2022/01/14 14:15] (current) – [Introduction] admin
Line 1: Line 1:
 ====== Raspberry Pi4 Initial Config ====== ====== Raspberry Pi4 Initial Config ======
 ===== Introduction ===== ===== Introduction =====
-  * This page will cover the initial configuration of the Raspberry Pi4 running RADIUSdesk Full version.+  * This page will cover the initial configuration of the Raspberry Pi4 running RADIUSdesk.
   * We assume it is plugged into a network with a Huawei LTE Router.   * We assume it is plugged into a network with a Huawei LTE Router.
   * We will assign a fixed IP Address of 192.168.8.220 to the Raspberry Pi4.   * We will assign a fixed IP Address of 192.168.8.220 to the Raspberry Pi4.
Line 30: Line 30:
 {{:md:initial_settings.png|}} {{:md:initial_settings.png|}}
  
-==== Adapt Sample Demo Mesh ====+==== Adapt Sample Demo1 Mesh ====
   * In a similar way edit the **Captive Portal Exit Point** in the Demo1 Mesh (change the IP Address)   * In a similar way edit the **Captive Portal Exit Point** in the Demo1 Mesh (change the IP Address)
  
-==== Adapt Sample Demo AP Profile ====+==== Adapt Sample Demo1 AP Profile ====
   * In a similar way edit the **Captive Portal Exit Point** in the Demo1 Access Point Profile (change the IP Address)   * In a similar way edit the **Captive Portal Exit Point** in the Demo1 Access Point Profile (change the IP Address)
  
Last modified: 2021/11/04 22:01