Differences

This shows you the differences between two versions of the page.

--- network:firmware:meshdesk [2024/08/11 15:29] – system
+++ network:firmware:meshdesk [2025/04/15 05:18] (current) – system
@@ Line 6: / Line 6: @@
 ----
-====== OpenWRT 23.05.x with MESHdesk packages ======
+====== OpenWRT 24.10.x with MESHdesk packages ======
 <alert type="info">
-Follow these instructions to include the MESHdesk package on devices that can run OpenWRT version 23.05.x
+Follow these instructions to include the MESHdesk package on devices that can run OpenWRT version 24.10.x
 </alert>
 ===== Minimum hardware requirements =====
@@ Line 69: / Line 69: @@
   * Check out the **openwrt-meshdesk** package from the Github repository.
 <code>
-#Do this in the working directory e.g. cd 23.05.2 (on the same level as the openwrt directory)
+#Do this in the working directory e.g. cd 24.10.1 (on the same level as the openwrt directory)
 git clone https://github.com/RADIUSdesk/openwrt-meshdesk.git openwrt-meshdesk
 </code>
@@ Line 153: / Line 153: @@
 |Network  | mosquitto-client-ssl  | Note the **CLIENT** package |
 |Network  | iw-full  | Required for Hotspot 2.0 |
+</panel>
+<panel type="primary" title="Advanced Package selection" no-body="true">
+^ Location      ^ Package       ^ Comment        ^
+| Kernel modules -> USB Support | kmod-usb-net-cdc-mbim  |    |
+| Kernel modules -> USB Support | kmod-usb-net-qmi-wwan  |     |
+| Kernel modules -> USB Support | kmod-usb-serial-option | optional - for AT commands |
+| Kernel modules -> USB Support | kmod-usb-serial-qualcomm  |   |
+| Kernel modules -> USB Support | kmod-usb-serial-sierrawireless  |   |
+| Kernel modules -> USB Support | kmod-usb-wdm  |   |
+| Network -> WWAN |uqmi  |    |
+| Utilities    |usb-modeswitch    |Used with LTE USB dongles  |
+| Utilities -> Terminal |minicom   |    |
 </panel>
@@ Line 174: / Line 190: @@
 WARNING: Makefile 'package/utils/policycoreutils/Makefile' has a dependency on 'libpam', which does not exist
 WARNING: Makefile 'package/utils/policycoreutils/Makefile' has a build dependency on 'libpam', which does not exist
-make[2]: Entering directory '/home/system/Documents/fw_sdk/23.05.2/openwrt/scripts/config'
+make[2]: Entering directory '/home/system/Documents/fw_sdk/24.10.1/openwrt/scripts/config'
 make[2]: 'conf' is up to date.
-make[2]: Leaving directory '/home/system/Documents/fw_sdk/23.05.2/openwrt/scripts/config'
+make[2]: Leaving directory '/home/system/Documents/fw_sdk/24.10.1/openwrt/scripts/config'
 make[1] world
 make[2] target/compile