Differences

This shows you the differences between two versions of the page.

--- network:firmware:meshdesk [2024/07/15 13:15] – system
+++ network:firmware:meshdesk [2025/04/15 05:18] (current) – system
@@ Line 6: / Line 6: @@
 ----
-====== OpenWRT 23.05.x with MESHdesk packages ======
+====== OpenWRT 24.10.x with MESHdesk packages ======
 <alert type="info">
-Follow these instructions to include the MESHdesk package on devices that can run OpenWRT version 23.05.x
+Follow these instructions to include the MESHdesk package on devices that can run OpenWRT version 24.10.x
 </alert>
 ===== Minimum hardware requirements =====
@@ Line 69: / Line 69: @@
   * Check out the **openwrt-meshdesk** package from the Github repository.
 <code>
-#Do this in the working directory e.g. cd 23.05.2 (on the same level as the openwrt directory)
+#Do this in the working directory e.g. cd 24.10.1 (on the same level as the openwrt directory)
 git clone https://github.com/RADIUSdesk/openwrt-meshdesk.git openwrt-meshdesk
 </code>
@@ Line 128: / Line 128: @@
 ^ Location      ^ Package       ^ Comment        ^
 | Base system    |**MESHdesk**    |     |
-| Base system    |sqm-scripts   | Used for bandwidth control on VLANs **(In Progress)** |
+| Base system    |sqm-scripts   | Used for bandwidth control on VLANs
 | Kernel Modules -> Netfilter Extensions  | kmod-nft-bridge | <wrap em>Include if you want to block or speed limit users</wrap> |
 | Kernel Modules -> Network Devices  | kmod-dummy | Include for internal VLAN (Dynamic RADIUS based VLANs on AP) |
@@ Line 139: / Line 139: @@
 | Luci -> Modules    | **luci-compat**   | Needs this modules for our package **VERY IMPORTANT** |
 | Luci -> Applications    | **luci-app-meshdesk**  | Luci App to enable and disable central management |
-| Luci -> Applications    | luci-app-sqm  | Used for bandwidth control on VLANs **(In Progress)**|
+| Luci -> Applications    | luci-app-sqm  | Used for bandwidth control on VLANs
 | Luci -> Themes   | **luci-theme-material**  | Modern theme that is easy to customize |
 | Luci ->  Libraries  | **luci-lib-httpclient**  |  |
@@ Line 153: / Line 153: @@
 |Network  | mosquitto-client-ssl  | Note the **CLIENT** package |
 |Network  | iw-full  | Required for Hotspot 2.0 |
+</panel>
+<panel type="primary" title="Advanced Package selection" no-body="true">
+^ Location      ^ Package       ^ Comment        ^
+| Kernel modules -> USB Support | kmod-usb-net-cdc-mbim  |    |
+| Kernel modules -> USB Support | kmod-usb-net-qmi-wwan  |     |
+| Kernel modules -> USB Support | kmod-usb-serial-option | optional - for AT commands |
+| Kernel modules -> USB Support | kmod-usb-serial-qualcomm  |   |
+| Kernel modules -> USB Support | kmod-usb-serial-sierrawireless  |   |
+| Kernel modules -> USB Support | kmod-usb-wdm  |   |
+| Network -> WWAN |uqmi  |    |
+| Utilities    |usb-modeswitch    |Used with LTE USB dongles  |
+| Utilities -> Terminal |minicom   |    |
 </panel>
@@ Line 174: / Line 190: @@
 WARNING: Makefile 'package/utils/policycoreutils/Makefile' has a dependency on 'libpam', which does not exist
 WARNING: Makefile 'package/utils/policycoreutils/Makefile' has a build dependency on 'libpam', which does not exist
-make[2]: Entering directory '/home/system/Documents/fw_sdk/23.05.2/openwrt/scripts/config'
+make[2]: Entering directory '/home/system/Documents/fw_sdk/24.10.1/openwrt/scripts/config'
 make[2]: 'conf' is up to date.
-make[2]: Leaving directory '/home/system/Documents/fw_sdk/23.05.2/openwrt/scripts/config'
+make[2]: Leaving directory '/home/system/Documents/fw_sdk/24.10.1/openwrt/scripts/config'
 make[1] world
 make[2] target/compile